A Look at the Different Types of Retaining Walls

Built to hold back earth or water, retaining walls can also serve the purpose of adding curb appeal to your home and increasing its value. If your property rests on uneven grounds and you want to keep rocks and soil back, a retaining wall is a great solution. If you are considering a retaining wall in Nashville , gather hardscaping ideas in the following article.

retaining wall Nashville

Gravity Walls

This type of retaining wall is for those who only need a small wall, usually four feet high or less. Gravity walls have a thicker base and tend to lean backwards against the materials it is designed to hold back. The structural integrity of a gravity wall is dependent upon the weight of the wall. Over time, the force of the materials pushes the wall outwards, which indicates that the wall is unstable and needs to be replaced.

Sheet Pile

Also known as a piling retaining wall, sheet pile retaining walls are ideally built on soft soils. They are ideal in spaces where there isn’t much space for wide barriers. With a sheet pile fence, planks made from steel, wood, or vinyl are pushed into the soil and held up by the ground on both sides. This wall also requires a cable to bond the wall and the tieback anchor. Similar to sheet pile retaining walls, anchored retaining walls also use cables fastened to the top and base to increase the strength of the wall.

Cantilever

These single-layered walls are uniformly thick, with the base connected to a slab and steel reinforcement in both the base and surface of the wall. If you hire a professional company to build the base, the cantilever is one of the best types of retaining walls to hold tall slopes.

Counterfort

Counterfort retaining walls are similar to cantilever walls, but contain a thin vertical concrete webs along the rear side of the walls. These vertical webs, known as counterforts, connect the top of the wall with the base to add strength to the wall. This makes them ideal when building a wall of 25 feet or higher.

Leave a Comment

Your email address will not be published. Required fields are marked *